17 common problems found on Kohler Courage engines include the starter not engaging, issues with the carburetor, and problems with the magneto coil kill wire. Other common issues include the choke cable, rebuild of the carburetor, and the main jet assembly.
Some troubleshooting tips for Kohler engines not starting include checking the ignition coil and spark plug. If the engine keeps dying, it could be due to a clogged carburetor caused by leaving fuel in the engine for a long time.
Understanding the differences between Kohler homeowner and professional engines can help in choosing the best motor.
Starter Will Not Engage
It can be frustrating when the starter of your 17 Hp Kohler engine does not engage. There are several possible causes for this issue. One common cause is a faulty starter solenoid. The solenoid may be stuck or not receiving enough power to engage the starter motor. Another possible cause is a faulty ignition switch. If the switch is not sending the correct signal to the starter solenoid, it may not engage. Additionally, a dead battery or loose connection can also prevent the starter from engaging. To troubleshoot this problem, start by checking the battery and connections. Ensure that the battery is fully charged and the connections are tight. If the battery and connections are in good condition, then you may need to replace the starter solenoid or ignition switch. Consult the manufacturer’s manual or a professional for further guidance on troubleshooting these components.
Credit: www.ebay.com
The Carburetors
The Carburetors:
Common issues:
One of the common issues with Kohler 17 hp engines is carburetor problems. Over time, the carburetor can become clogged due to fuel left in the engine for an extended period. This can lead to a sticky substance that obstructs the carburetor and causes the engine to stall. Another issue is a faulty carburetor, which can prevent the engine from starting. If the carburetor is clogged or faulty, it will need to be cleaned or replaced. Regular maintenance, such as cleaning the carburetor and fuel system, can help prevent these problems.
Solutions:
To address carburetor issues, it is recommended to clean or replace the carburetor. This can be done by following the manufacturer’s instructions or consulting a professional. Additionally, ensuring that fuel is not left in the engine for extended periods can help prevent clogging. Regular maintenance, such as cleaning the carburetor and fuel system, can also help maintain proper functioning of the carburetor and prevent future issues.
Permatex To Seal Their Valve Covers
Sealing the valve covers is an important step in maintaining the performance and longevity of your engine. Permatex is a widely used product for this purpose due to its effectiveness and reliability.
Permatex is used to seal valve covers to prevent oil leaks and ensure proper lubrication of the engine. It creates a strong and durable seal that can withstand high temperatures and pressure.
When using Permatex to seal valve covers, it is important to follow a step-by-step guide to ensure a proper seal. Here is a brief overview of the process:
- Clean the valve cover and the mating surface on the engine.
- Apply a thin layer of Permatex on the valve cover gasket.
- Position the gasket on the valve cover and press it down firmly.
- Place the valve cover on the engine and hand tighten the bolts.
- Tighten the bolts in a crisscross pattern to ensure even pressure.
- Check for any leaks and re-tighten the bolts if necessary.
By following these guidelines, you can ensure a proper seal and avoid any problems associated with valve cover leaks.
Frequently Asked Questions For 17 Hp Kohler Engine Problems
What Engines Are Being Recalled On Kohler?
Kohler is recalling gasoline engines due to the risk of fuel leaks and fires. It’s best to contact Kohler directly for information on specific engine models being recalled.
What Would Cause A Kohler Engine Not To Start?
A defective ignition coil can cause a Kohler engine not to start. Before replacing the coil, check if the spark plug is working properly. If the spark plug is fine, test the ignition coil with a coil tester. If it’s defective, replace the coil.
Which Kohler Motor Is Best?
The best Kohler motor is subjective and depends on your specific needs. Kohler offers a range of motors for different applications, including homeowner and professional engines. Consider factors such as power, durability, and performance to determine which Kohler motor is best for you.
Why Does My Kohler Engine Keep Dying?
If your Kohler engine keeps dying, it could be due to a clogged carburetor. Leaving fuel in the engine for a long time can cause the fuel to thicken and clog the carburetor, leading to engine stalling. Make sure to clean the carburetor and use fresh fuel to prevent this issue.
Conclusion
To ensure the smooth performance of your 17 Hp Kohler engine, it is important to address the common problems that may arise. From starter issues to carburetor complications, being aware of these potential hiccups can save you time and frustration.
Whether it’s a faulty ignition coil or a clogged carburetor, taking the necessary steps to maintain and troubleshoot your engine will keep it running smoothly for years to come. Stay knowledgeable and proactive in addressing these potential problems to ensure the longevity of your Kohler engine.
